Wheel alignment shops

Increased productivity
Selson Air Jacks provide quicker lift times over conventional jacks of 50% or more on alignment service racks.

Eliminate service costs
Unlike hydraulic jacks, Selson Air Jacks have very few moving parts. Telescoping stabilizers and stroke limiting devices inside the air springs keep maintenance costs to absolute minimums. Selson Air Jacks are high quality professional products complete with a 12-month warranty and a life expectancy of 10 years.

Safe to use
The air springs in Selson Air Jacks are manufactured from oil and ozone resistant neoprene rubber and are constructed of 2 plies of this extremely durable material. Air Jacks cannot be over-inflated or overloaded due to the factory installed safety valve. When used in an air line with more than the required air pressure, the excess air simply passes through the safety valve while the jack inflates.

Versatile
The durable construction, compact size and light weight makes Selson Air Jacks ideal for use in alignment service bays. Requiring only 6.9 bar to achieve its 2 Tonne rated lift capacity, the air jack can be run from any compressed air system.
Once inflated, the air line to the jack can be removed for connection to impact tools or other equipment. Storage of the Selson Air Jack is no problem with the compact size of the hand-held HBN3 and HBNXLO models.

Paint and Auto body shops

Increased productivity
The Selson Air Jack is becoming the preferred jack for set-up on frame straightening rigs. Fast operation brings a reduction in set-up and break-down times by 20-30 minutes per vehicle.

Cost-Effective
When compared with hydraulic jacks, the low maintenance of a Selson Jack brings much lower running costs. The faster operation of a Selson Air Jack also increases productivity in the workshop, with more vehicles able to be serviced per day.

Safe to use
The body shop head cap fitted to Selson Air Jacks cradles the pinch weld seam of sill section, securing the jack safely in place. Variants in head cap styles and sizes are available to suit a wide range of vehicles.
When compared to the power rams typically used in paint and auto body shops, Selson Air Jacks are a safer and more effective solution. Power rams have a limited lift height and may require other materials for packing. If packing is required the system becomes very unstable and unsafe. The wide base and vehicle tracking ability of the Selson Air Jack adds safety to its inherit speed.

Versatile
The lift capacity of Selson Air Jacks, combined with their lift height and inherit safety, allow whole sides of vehicles to be positioned in pinch clamps. Finger touch control means even more speed. The body shop headcap assures safety and prevents panel damage.
Both the hand-held and handle-type air jacks can be easily stored in bays and workshops when not in use. The models with the long-reach handles also allow for safe and easy positioning of the jack underneath the vehicle.

Road Service Vehicles & Offroad applications

Increased productivity
The fast lifting action of the Selson Air Jack means that roadside tyre changing times can be significantly reduced. For off-road vehicles Selson Jacks can assist in rescuing a bogged vehicle by one wheel, a front or rear axle or a complete side of the vehicle.

Eliminate service costs
The long service life of Selson Air Jacks means running costs are kept to an absolute minimum. Interchangeable head caps and a variable lift height means one Selson Air Jacks is suitable for all applications.

Safe to use
The unique design of the Selson Air Jack allows for safe operation on any surface. When used on dirt, asphalt, gravel, snow or uneven ground Selson Jacks will resist sinking into the surface. Their wider bases and unique ability to follow the lifting arc of any vehicle provide maximum stability on any surface.

Versatile
The durable construction, compact size and light weight of Selson Air Jacks makes them ideal for use in road service applications. The hand-held models are easily stored in road service vehicles, and can be operated to maximum lift capacity by a compressed air cylinder, on board brake compressor or service vehicle compressor.

Heavy truck and bus fleet maintenance

Increased productivity
Selson air jacks reduce the time required to lift a vehicle by more than half in every shop environment. In field service of heavy vehicles Selson Air Jacks are in a league of their own, reducing the lifting time by more than 50% that of conventional jacks.

Cost-Effective
With few moving components, the Selson Air Jack requires little or no maintenance. The jack is covered by our manufacturer's 12-month warranty against faulty parts or workmanship.
The Selson air jack will not leak, deflate or become unstable as is often the case with standard air over hydraulic jacks or hydraulic jacks. Excessive lateral forces, set up by the geometry of hydraulic jacks, create worn seals and bent frames. In contrast, the Selson Air Jack has few moving parts, its telescopic centre column conforms to the arc of the vehicle being raised and has a life expectancy of ten years. The Selson Air Jack is an investment in speed, safety and economy.

Safe to use
The long reach handle on heavy duty models ensures that the operator is out from under the vehicle. Road-side service can be performed out of the way of oncoming traffic on busy highways.
The Selson Air Jack performs safely in all weather conditions. On soft surfaces, the low height of 185mm fits under low axles with ease. The wide base provides a lift platform with maximum support and flotation.

Versatile
Heavy duty models of the Selson Air Jack are designed to enable easy "wall-hugging" storage when not in use.
Needing only 6.9 bar to achieve rated lift capacity, the Selson Air Jack can be operated from a compressor or compressed air cylinder. Once in lift position, the air line can be disconnected to operate other tools and equipment.
A range of accessories is also available for the Selson heavy duty models, to enable lifting from different lift points and varying lift heights.